BIG AND GRAND NEWS UPDATE | SONY BBC EARTH | FTA @ DD FREE DISH

SONY BBC EARTH FTA @ DD FREE DISH



Technical Parameters
NSS6 95° D East
Frequency. 11037
Pol. Horizontal

Symbol rate. 40699


FREE TO AIR
DD FREE DISH
NSS695 DIGRE
KU BAND 2 FEET


What is DTH?


DTH is Direct to Home service for receiving TV service directly through satellite with a personal small dish antenna. DTH service does not require a local cable operator for receiving TV service at home

What is DD Free Dish? 

Doordarshan’s DTH service which known as DD Free Dish was launched in December 2004 with the modest capacity of 33 channels. This service was inaugurated by Hon’ble Prime Minister of India. DD Free Dish has been upgraded from time to time. At present its capacity is 104 SDTV channels along with 40 Radio channels. DD Free Dish is available in Ku-Band on GSAT-15 (at 93.5°E). This Ku-Band DTH service provides the TV coverage throughout the Indian territory (except Andaman & Nicobar Islands). DTH signals can be received through a small sized dish receive system ( i.e. Set Top Box and Dish of size of 60 to 90 cm in diameter) for which no monthly subscription fee is payable by the viewers.

Tuning of old DD Free Dish STB:
Following is the suggestive tuning procedure of STB for receiving the TV Channels.
  
1.                 Satellite Name:  
a)      Go to Installation menu or setup Programme from remote.
b)      Select Satellite Edit menu.
c)      Select Add New Satellite menu
d)      Select Sat Name Edit menu.
e)      Enter Satellite Name as GSAT-15.
f)       Enter Satellite Longitude as 93.5° E
g)      Press Exit 

 2.      LNB Configuration 
a)      Go to LNB Configuration menu. Ensure that satellite selected  is GSAT-15 only.
b)      Set LNB Types as Universal.
c)      Set LNB Power on.
d)      Press Exit 

3.   Transport streams of Transponder (TP) Edit: 
a)       Go to Transponder Edit menu. Ensure that satellite selected is
          GSAT-15.
b)       Select Add New TP menu.
c)       Enter TP Frequency as 11090 MHz
d)       Select Symbol rate as 29500 Ksps.
e)       Select Polarization as Vertical.
f)        ‘22K’    OFF*
g)       ‘Disc. Equal’. Off 
h)      Select Scan as FTA.
 i)       Press OK.

After filling the above values go to ‘Search’ ​
Press ‘OK’



Posted by; Siraj kottakkal
Previous
Next Post »
Thanks for your comment